PTO CRUISE
This function is to control the engine
speed for convenient operation at
over 1,300 rpm.
(1) PTO Cruise Switch
(2) PTO Cruise Control Switch
PTO CRUISE ACTIVATION
Run the engine at a speed over 1,300
RPM. Set the desired engine speed.
Then, with the brake and clutch pe
-
dals released, set the PTO cruise
switch to the ON position and press
the SET (-) portion of the PTO cruise
control switch.
The cruise control switch can be
operated as follows while the PTO
cruise function is activated:
• RES(+): Increment by 50 rpm
• SET(-): Decrement by 50 rpm
td2O411A
CAUTION
The quick-turn function is use-
ful when working with a rotary
in eld. However, be cautious
during its use as its misuse
can cause rollover. Never use
this function during driving.
Also, never use it on a steep
slope and sharp corner.
•
7. If your work requires mid to high
load applied to the front loader or
four wheels, using the quick-turn
function can damage the quick-turn
clutch disc or wear it prematurely.
Therefore, never use the quick-turn
function under this condition.
To Next Page
Loading...
Need help?
General
