CAUTION
If the lifting arm is properly
operated but abnormal noise
is still heard, the hydraulic sy-
stem may be malfunctioning.
In this case, let the engine idle
for an 10 to 15 minutes addi-
tionally and then try to start
the engine again. If the pro-
blem is still present, contact
your local KIOTI Dealer.
•
7.
However, if the draft control lever
is pushed forward to its end, the
lowest position of the lifting arm
can be lowered a little. On the other
hand, if the lever is pulled back to
its end, the highest position of the
lifting arm can be raised a little.
td2O524a
(1) Double Acting Valve 1, Lever 1
(2) Double Acting Valve 2, Lever 2
(A) Port A (C) Port C
(B) Port B (D) Port D
REMOTE HYDRAULICS
D O U B L E A C T I N G L E V E R ( I F
EQUIPPED)
CAUTION
The implement may shake up
and down as the draft sen-
sor is under impact when the
tractor is passing over irregu-
lar ground with the middle or
lowest top link hole selected.
In this case, put the draft con-
trol lever to the “Deep” posi-
tion to decrease the sensitivity
of the draft function or select
the highest top link hole.
If the tractor has been stored
for a long period of time or the
transmission uid is just chan-
ged, abnormal noise may be
heard and the hydraulic lifting
arm may be inoperable tempo-
rarily. In this case, let the engi-
ne idle for 3 to 4 minutes.
•
•
To Next Page
Loading...
Need help?
General
