3
Basic copy operations
3-50 bizhub 501/421/361 (Version 2)
3.7.1 Selecting single-sided copies
0 As the factory default, "1-Sided > 1-Sided" is selected.
0 For details on using the original glass to scan multi-page originals, refer to "Scanning a multi-page
original from the original glass" on page 3-15.
1 In the Basic screen, touch [Duplex/Combine].
The Duplex/Combine screen appears.
2 Touch [1-Sided > 1-Sided] or [2-Sided > 1-Sided].
– If "2-Sided > 1-Sided" is selected, specify the position of the binding margin and the orientation of
the loaded original, otherwise the copies will not be printed as desired.
– If the binding position for the original is set to "Auto", the position of the binding margin is
automatically selected. A binding margin along the long side of the paper is selected if the original
length is 297 mm or less. If the original length is more than
297 mm, a binding margin along the short side of the paper is selected.
– If "Auto" is selected under "Original Bind Direction", the binding margin is set at the top or at the left.
To Next Page
Loading...
Need help?
General
