9
Replacing toner cartridges and staple cartridges and emptying punch scrap box
9-20 bizhub 501/421/361 (Version 2)
Display in Enlarge Display mode
9.3.1 To empty the punch scrap box of FS-523
0 Even when the punch scrap box is full, the message is not displayed. Before using punch mode,
perform the following procedure to check if the punch scrap box, if needed.
0 The punch scrap box is not disposable. Be sure to return it to its original position.
1 Slide the finisher to the left.
– Holding the finisher handle on the top, slide the finisher to
the left until it stops.
2 Open the finisher right door FN7.
3 Pull out the punch scrap box.
To Next Page
Loading...
Need help?
General
