bizhub 501/421/361 (Version 2) 3-15
Basic copy operations
3
3.3.4 Scanning a multi-page original from the original glass
When making double-sided or combined copies using the original glass, place each page of a multi-page
original on the original glass to scan it. The following procedure describes how to place single-sided original
pages on the original glass to make double-sided copies.
0 If [Group] is specified for the finishing process, each time one page of the original is scanned, the
specified number of copies will be produced for that page.
0 If [Sort] is specified for the finishing process, after all pages of the original have been scanned, copies
will be produced so that one copy of every page will be bundled together as one copy.
0 The output method used with the "Separate Scan" setting can be set to "Page Print" or "Batch Print".
As a default, "Page Print" is selected.
0 For details on the output method used with the "Separate Scan" setting, refer to "Copier Settings" on
page 12-23.
1 Lift open the ADF.
2 Position the first page or the first side of the original face down onto the original glass.
– For details on positioning the original, refer to "Placing the original on the original glass" on
page 3-9.
3 Close the ADF.
4 In the Basic screen, touch [Duplex/Combine].
The Duplex/Combine screen appears.
To Next Page
Loading...
Need help?
General
