4
Additional copy operations
4-40 bizhub 501/421/361 (Version 2)
4.8.8 Setting the "Sound Setting" functions
With the Sound Setting functions, The sound level can be adjusted by selecting on from 16 levels provided
for the sounds that are produced, for example, when a key is pressed. Specified sound can also be muted in
this setting.
For details, see the table below.
As the factory default, "8" is selected for all operation sounds.
Operation Confirmation Sound
Sound ON/OFF Settings All Sounds Select to turn on/off all sounds in Sound Setting.
Operation Confirmation
Sound
Select to turn on/off all sounds in Operation Confirmation
Sound setting.
Successful Completion
Sound
Select to turn on/off all sounds in Successful Completion
Sound setting.
Completed Preparation
Sound
Select to turn on/off the Completed Preparation Sound set-
ting.
Caution Sound Select to turn on/off all sounds in Caution Sound setting.
Operation Confirmation
Sound
Input Confirmation
Sound
When pressing a key in the control panel or a button on the
touch panel
Invalid Input Sound When incorrectly pressing a key in the control panel or a but-
ton on the touch panel
Basic Sound When switching settings and the default setting is selected
Successful Completion
Sound
Completed Operation
Sound
When an operation is completed successfully
Completed Transmis-
sion Sound
When a communication operation is completed successfully
Completed Preparation
Sound
When a device has finished setting up
Caution Sound Simple Caution Sound
(Level 1)
When it is almost time to replace supplies or a replaceable
part and a message appears in the touch panel
Simple Caution Sound
(Level 2)
When a user has performed an operation incorrectly
Simple Caution Sound
(Level 3)
When an error occurs that can be corrected by the user by re-
ferring to the message that appeared or the user manual
Severe Caution Sound When an error occurs that cannot be corrected by the user or
requires a service representative
To Next Page
Loading...
Need help?
General
