bizhub 501/421/361 (Version 2) 8-51
Application functions
8
8.14.3 Erasing outside areas of the original ("Non-Image Area Erase" function)
This function detects the original size placed on the original glass and erases outside areas of the original.
1 Position the original to be copied.
– For details on positioning the original, refer to "Feeding the original" on page 3-8.
2 Touch [Application], and then touch [Erase].
– To cancel changes to the settings for all Application functions, press the [Reset] key. All changes to
the settings are canceled.
The Erase screen appears.
3 Touch [Non-Image Area Erase], then touch [OK].
– To cancel the setting and select the default, press the [Reset] key.
– To cancel the "Non-Image Area Erase" function, touch the key again.
4 Specify any other desired copy settings.
5 Using the keypad, type in the desired number of copies.
6 Press the [Start] key.
To Next Page
Loading...
Need help?
General
