bizhub 501/421/361 (Version 2) 3-69
Basic copy operations
3
4 Touch [OK], and then touch [OK] again.
The Basic screen appears again.
3.11.4 Stapling copies (Staple settings)
Copies can be fed out stapled either in the corner or at two places.
!
Detail
In order for the copies to be stapled, all of the following conditions must be met.
The paper width must be between 182 mm and 297 mm.
The paper length must be between 139.7 mm and 431.8 mm.
If the "Mixed Original" setting is selected, all copies must have the same paper width.
2
Reminder
Copies can be fed out stapled either in the corner or at two places only when the finisher is installed.
Copies can be fed out stapled either in the corner or at two places.
Finisher FS-522
Number of Bound Pages: 50 sheets of 90 g/m
2
paper
Finisher FS-523 (Primary output tray)
Number of Bound Pages: 50 sheets of 90 g/m
2
paper
Tray Paper Weight Paper Size Loading Capacity
Finishing tray 1 56 g/m
2
to 90 g/m
2
A3 w to A5 v When the stack is 32 mm high or
contains 200 sheets or 20 sets
Finishing tray 2 56 g/m
2
to 90 g/m
2
A3 w to A5 v A4 w or smaller: 132 mm high or
contains 1,000 sheets or 100 sets
B4 w or larger: When the stack is
64.5 mm high or contains 500
sheets or 50 sets
Optional finishing tray 56 g/m
2
to 90 g/m
2
A3 w to A5 v When the stack is 24 mm high or
contains 200 sheets or 20 sets
Paper Weight Paper Size Loading Capacity
60 g/m
2
to 90 g/m
2
A3 w to B5 w/v A4 w or smaller: When the stack is 375 mm high or contains
3,000ysheets.
B4 w or larger: When the stack is 187.5 mm high or contains
1,500 sheets.
To Next Page
Loading...
Need help?
General
