bizhub 501/421/361 (Version 2) 3-75
Basic copy operations
3
3.12 Selecting a folding setting
If the Finisher FS-522 is installed with the Saddle stitcher SD-507, copies can be folded before being fed out.
The following folding settings are available.
2
Note
Copies can be folded in half or bound at the center only if finisher is installed with the saddle stitcher
attached.
3.12.1 Folding copies in half ("Half-Fold" setting)
!
Detail
In order for copies to be bound at the center or folded in half, all of the following conditions must be met.
The paper width must be between 182 mm and 297 mm.
The paper length must be between 257 mm and 431.8 mm.
1 In the Basic screen, touch [Finishing].
The Finishing screen appears.
Setting Description
Half-Fold Select this setting to fold copies in half before feeding them out. (Refer to page 3-75.)
Center Staple & Fold Select this setting to staple copies at two places along the center, then fold the copies in
half before feeding them out. (Refer to page 3-77.)
Paper weight Paper size Maximum number of bound sheets
56 g/m
2
to 90 g/m
2
B5 w, A4 w, B4 w, A3 w, 200 sheets or 20 sets
To Next Page
Loading...
Need help?
General
