bizhub 501/421/361 (Version 2) 12-23
Utility mode
12
12.3.3 Copier Settings
Parameter Description Default Setting
Auto Booklet ON when
Fold & Staple
Select whether or not the "Booklet" function is selected au-
tomatically when the "Center Staple & Fold" setting is se-
lected. This parameter is available only if optional finisher is
installed.
Auto Select Booklet
Auto Zoom For Combine/
Booklet
Select whether or not the preset zoom ratios are automati-
cally selected when the "Auto" Paper setting is selected
and a combined copy setting or the "Booklet" function is
selected.
• Auto Display Zoom Ratio:
The following zoom ratios are specified.
2in1, Booklet: 70.7%
4in1: 50.0%
8in1: 35.3%
•Off:
The zoom ratio is not selected automatically.
Auto Display Zoom Ra-
tio
Auto Sort/Group Selection Select whether or not the "Sort" setting is automatically se-
lected when 2 or more copies are set to be printed in a sin-
gle job.
•Yes:
When an original is loaded into the automatic docu-
ment feeder and the [Start] key is pressed, the "Group"
setting is automatically selected if the original consists
of only one page, and the "Sort" setting is automatical-
ly selected if the original consists of two or more pages.
•No:
The "Sort" or "Group" setting is not selected automat-
ically.
Yes
Default Copy Settings Specify the default settings for Copy mode.
The copy settings selected when the machine is turned on
(the power switch is set to "n") or the [Reset] key is pressed
can be specified.
• Current Setting:
The settings specified from the touch panel before Util-
ity mode was entered are set as the default settings for
Copy mode.
• Factory Default:
The factory default settings are set as the default set-
tings for Copy mode.
Factory Default
Default Enlarge Display
Settings
Specify the default copy settings for Enlarge Display mode.
This parameter appears if the machine had previously en-
tered the Enlarge Display mode of Copy mode.
• Current Setting:
The settings specified from the touch panel before Util-
ity mode was entered are set as default settings for
Copy mode.
• Factory Default:
The factory default settings are set as the default set-
tings for the Enlarge Display mode.
Factory Default
When AMS Direction is In-
correct
Select whether or not printing continues when the paper
and original orientations are different with the "Auto Paper
Select" setting selected.
•Print:
The Zoom setting is automatically set and the copy is
printed on paper of the specified size in the specified
orientation.
• Delete Job:
The job is deleted, and no copies are printed.
Print
Separate Scan Output
Method
Select whether copies are printed as the original is being
scanned or after the entire original has been scanned when
scanning an original in separate batches or when scanning
a multiple-page document from the original glass.
• Page Print:
Printing of copies that can be printed begins while the
original is being scanned.
•Batch Print
Printing begins after all pages of the original have been
scanned.
Page Print
To Next Page
Loading...
Need help?
General
