1
2
3
4
5
6
7
8
9
10
11
12
41
Operation Mode
Regular Maintenance Information
Icon Name Meaning
Roller Cleaning Roller Cleaning must be performed.
Filter Replacement The filter must be replaced.
Regular Maintenance Regular maintenance must be performed.
Calibration Calibration must be performed or a density read error has been
detected. (This is cleared after calibration is performed.)
Tray Information
The tray information, film size, film type, and number of sheets is displayed for each tray.
Icon Name Meaning
tray 1 Information for tray 1 is displayed to the right of the icon. When the
tray becomes empty, the icon is inverted for a set period of time.
tray 2 Information for tray 2 is displayed to the right of the icon. When the
tray becomes empty, the icon is inverted for a set period of time.
tray 3 Information for tray 3 is displayed to the right of the icon. When the
tray becomes empty, the icon is inverted for a set period of time.
Items display
film size 14×17,14×14,11×14,10×12,8×10
film type B (BLUE), C (CLEAR), M (MAMMO)
film number 0 to 126 (The tray is empty when this is "0".)
3�2�2
Status LED Display
How the LED is lit indicates various states.
Status Message Meaning
OFF Power off, standby mode, shutting down, rebooting, or updating
Flashing blue Warming Up or printing
Blue light ON Ready to print
Flashing red Not ready to print (error, resolving error, or all trays are empty)
Red light ON Not ready to print (one tray is empty, maintenance is being performed, film is being
loaded, filter is being replaced, or unit is being cleaned)
To Next Page
Loading...
Need help?
General
