56
Maintenance Mode
3.6.2
Maintenance Menu
Maintenance mode consists of the following menus.
Icon Item Meaning
Standby Mode Enables standby mode. In standby mode, the warm-up time of the main unit
is shortened and the power of the connected PC is turned off.
This menu item may not be available (the icon is grayed out) depending on
the setting of PC.
Film Processing
Amount
Displays the cumulative data of the film currently being used.
You can view the data on a daily, weekly, or monthly basis for each film size
and type.
QC Displays the output results for the QC patterns.
Displays the results for the last three QC patterns.
The history can also be deleted.
Error History Displays the error codes for errors that occurred.
Roller Cleaning Performs roller cleaning. This menu item may not be available (the icon is
grayed out) when the mammography media expansion tray is not installed in
Tray 3 (expansion tray). The icon blinks when the set time has passed since
the last roller cleaning.
Password Displays the screen in which a password is entered.
System Reset Clears all queued jobs and restarts the main unit.
Main Unit Settings Lets you configure the tray, film, and sorter settings.
Current Date & Time Sets the date and time for the main unit and connected PC. The date can be
set up to December 31, 2037.
(The date and time setting may not be available depending on the setting of
your computer.)
Sleep Mode Setting
Lets you configure the sleep mode setting of the main unit.
Network Information Displays the network information for the main unit and connected PC.
Service Information
Displays the serial number, running time, total number of output sheets, and
version information of the main unit.
3.6.3
Standby Mode
In standby mode, the warm-up time of the main unit is shortened and the power of the connected PC
is turned o.
This menu item may not be available depending on the setting of PC.
1
Enable maintenance mode.
“3.6.1 Enabling and Using Maintenance Mode” (page 54)
2
Use the [Test print] and [Calibration] buttons to move the cursor to the
[Standby Mode] icon
. Press the [Service/Enter] button to select the
item�
To Next Page
Loading...
Need help?
General
