1
2
3
4
5
6
7
8
9
10
11
12
73
3�7 Film Related Settings
You can change the film size or type settings from the DRYPRO 873 operation panel.
3�7�1
Changing the Film Size from the Operation Panel
When changing lm-related settings, make sure there are no lms
in the supply tray of which you want to change the settings� After
changing settings in the operation panel, you need to change the
settings of the supply tray unit�
When you want to change the lm size to 10x12 or 8x10, or from 10x12 or
8x10 to a dierent size, the settings of some mechanical parts need to be
changed. Contact Konica Minolta technical representatives.
If you change the lm size with items remaining in the queue, E9211 error
will occur as many times as the number of items in job. When changing
the settings, make sure there is nothing left in the job.
1
Empty the film from the supply tray.
2
In maintenance mode, use [Main Unit Settings] to set [Film Size] and [Film
Type]�
3
Press the Tray button�
The following message appears in the display window.
To Next Page
Loading...
Need help?
General
