Konica Minolta DRYPRO 873 - Introduction; Classifications

5
Introduction
Thank you for purchasing Laser Imager DRYPRO MODEL 873 (hereinafter referred to as “DRYPRO
873”).
DRYPRO 873 is a totally dry processing laser imager. This product is easy to use and environmentally
friendly while maintaining sophisticated features and high image quality.
This Operation Manual provides instructions for use and operation procedures to ensure that users of
the DRYPRO 873 become thoroughly familiar with the product and handle it safely. This manual should
be kept in a handy place for quick reference. If you should lose this manual, contact Konica Minolta
technical representatives.
Classications
This product is classied as below.
Classification based on the kind of protection for electric shock�
A power supply device for commercial use outside.
Class I device.
Classification based on the degree of protection for water intrusion which
may lead to danger�
Ordinary Device.
(Enclosed device without protection against ingress of water. IPX0)
This product is not suitable for use in an environment where an inflammable anesthesia which is mixed
with air or an inflammable anesthesia which is mixed with oxygen or nitrogen monoxide is present.
Classification based on the operation mode�
Continuous operation.
Classification based on the category of Laser Product�
Class 1 Laser product. (IEC 60825-1:2007)