1
2
3
4
5
6
7
8
9
10
11
12
85
4�5 How to Clear a Film Jam
When a lm jam error occurs, the error code, error status, and solutions are displayed in the message
display window on the operation panel.
4�5�1
Film Jam Between the Supply tray 1 and 2 and the Position Regulation Unit
Error code 4211,4410,4411,4412,4510,4522 or 4512 is displayed. (Error code 4211 is only displayed
when supply tray 3 is not set.)
When a lm jam has occurred between the Supply tray 1 and 2 and the position regulation unit, remove
the lm, following the steps below.
1
A description of the step to be taken appears in the display window�
2
Open the front cover.
Do not push down the open front cover or
place an object on it. Failure to observe
this caution may cause damage to the
front cover.
To Next Page
Loading...
Need help?
General
