42
Operation Mode
3�2�3
Error Display
If an error that requires action occurs, the following message appears.
When action is needed to resolve the error
When a film jam must be cleared
If the above message appears, see “4.5 How to Clear a Film Jam” (page 85).
3�2�4
Sleep Mode
The main unit has a sleep mode function.
Sleep mode is a power-saving mode that enables automatic startup when the main unit has not been
operated, either from the operation panel or by printing, for a specified period of time.
1
The following message appears during sleep mode�
2
The following message appears when the operation panel is touched�
3
Use the [Test print] and [Calibration] buttons to move the cursor. Select [YES]
and press the [Service/Enter] button to cancel sleep mode, or select [NO] to
return to the sleep mode display�
To Next Page
Loading...
Need help?
General
