KTM 1290 SUPER DUKE R 2021 User Manual

13 SERVICE WORK ON THE CHASSIS
108
13.15 Installing the main silencer
S03917-11
(SUPER DUKE R)
Warning
Risk of injury Moving parts of the exhaust valve
constitute a risk of injury.
– Do not touch the exhaust valve if the main
silencer has been removed.
– Make sure that nobody gets caught when the
exhaust valve is actuated.
–
Mount seal ring
1
.
S03916-11
– Position the main silencer.
–
Mount screw
2
with washer, but do not tighten yet.
S03915-11
– Position the exhaust clamp.
–
Mount and tighten screw
3
.
Guideline
Screw, exhaust
clamp on main
silencer
M6 10 Nm (7.4 lbf ft)
–
Tighten screw
2
.
Guideline
Remaining screws,
chassis
M8 25 Nm
(18.4 lbf ft)
– Position the heat protector.
–
Mount and tighten screws
4
.
Guideline
Screw, heat protec-
tor on main silencer
M5 4 Nm (3 lbf ft)
S04799-11
(SUPER DUKE RR)
Warning
Risk of injury Moving parts of the exhaust valve
constitute a risk of injury.
– Do not touch the exhaust valve if the main
silencer has been removed.
– Make sure that nobody gets caught when the
exhaust valve is actuated.
–
Mount seal ring
1
.

KTM 1290 SUPER DUKE R 2021 Specifications

General

Displacement	1301 cc
Transmission	6-speed
Rear Suspension	WP APEX monoshock, fully adjustable
Seat Height	835 mm
Fuel Tank Capacity	16 liters
Dry Weight	189 kg
Bore x Stroke	108 mm x 71 mm
Compression Ratio	13.5:1
Fuel System	Electronic fuel injection
Lubrication	Forced oil lubrication with 3 oil pumps
Wheelbase	1482 mm
Traction Control	MTC (Motorcycle Traction Control), lean-angle sensitive
Engine Type	V-Twin, 4-stroke
Power	180 hp
Torque	140 Nm @ 8000 rpm
Frame	Chromium-Molybdenum steel frame, powder coated
Front Suspension	WP APEX 48
Front Brake	320 mm discs
Rear Brake	Brembo two-piston caliper, 240 mm disc
Clutch	PASC slipper clutch, hydraulically actuated
ABS	Bosch 9.1 MP (incl. Cornering ABS and Supermoto mode)