KTM 1290 SUPER DUKE R 2021 User Manual

SUSPENSION SETTING 12
93
Info
Turn clockwise to increase the damping; turn coun-
terclockwise to reduce damping when the shock
absorber rebounds.
S04731-11
(SUPER DUKE RR)
–
Turn adjusting screw
1
clockwise all the way.
Info
Adjusting screw
1
is located at the upper end of
the right fork leg.
The rebound damping is located in the right fork
leg REB. The compression damping is located in the
left fork leg COMP.
– Turn counterclockwise by the number of clicks correspond-
ing to the fork type.
Guideline
Rebound damping
Street 17 clicks
Sport 15 clicks
Race course 15 clicks
Info
Turn clockwise to increase the damping; turn coun-
terclockwise to reduce damping when the shock
absorber rebounds.
12.5 Bleeding the fork legs
Preparatory work
– Raise motorcycle with the work stand (inserted). ( p. 100)
S03908-13
Main work
(SUPER DUKE R)
–
Release bleeder screws
1
.
Any excess pressure escapes from the interior of the
fork.
– Tighten the bleeder screws.
S04731-13
(SUPER DUKE RR)
–
Release bleeder screws
1
.
Any excess pressure escapes from the interior of the
fork.
– Tighten the bleeder screws.

KTM 1290 SUPER DUKE R 2021 Specifications

General

Displacement	1301 cc
Transmission	6-speed
Rear Suspension	WP APEX monoshock, fully adjustable
Seat Height	835 mm
Fuel Tank Capacity	16 liters
Dry Weight	189 kg
Bore x Stroke	108 mm x 71 mm
Compression Ratio	13.5:1
Fuel System	Electronic fuel injection
Lubrication	Forced oil lubrication with 3 oil pumps
Wheelbase	1482 mm
Traction Control	MTC (Motorcycle Traction Control), lean-angle sensitive
Engine Type	V-Twin, 4-stroke
Power	180 hp
Torque	140 Nm @ 8000 rpm
Frame	Chromium-Molybdenum steel frame, powder coated
Front Suspension	WP APEX 48
Front Brake	320 mm discs
Rear Brake	Brembo two-piston caliper, 240 mm disc
Clutch	PASC slipper clutch, hydraulically actuated
ABS	Bosch 9.1 MP (incl. Cornering ABS and Supermoto mode)