7 COMBINATION INSTRUMENT
40
7.28.3 Navigation (optional)
S03791-01
Condition
• Function KTM MY RIDE (optional) activated.
• The KTM MY RIDE app (optional) is installed and opened on a
suitable cellphone (Android devices Version 6.0 and higher,
iOS devices Version 10 and higher).
• Function Bluetooth
®
(optional) activated.
• The combination instrument is connected to a suitable cell-
phone.
• The GPS function is activated on the connected cellphone.
• For voice navigation: The combination instrument is connected
to a suitable headset and an appropriate language package has
been downloaded in the KTM MY RIDE app.
– Press the RIGHT button when the menu is closed.
– Press the UP or DOWN button until KTM MY RIDE is marked.
Press the RIGHT button to open the menu.
– Press the UP or DOWN button until Navigation is marked.
Press the RIGHT button to confirm the selection.
You can access navigation information and adjust the volume in
the menu Navigation.
Info
The route guidance is displayed in the small and large NAV-
IGATION widget.
The Audio function can be used with the navigation func-
tion at the same time.
An incoming call is visualized in a small window at the top
of the combination instrument display when the navigation
function is active.
When the navigation function is switched on and the device
is connected, the GPS symbol appears in the display of the
combination instrument.
7.28.4 Navigation information (optional)
S03793-01
Condition
• Function KTM MY RIDE (optional) activated.
• The
KTM MY RIDE app (optional) is installed and opened on a
suitable cellphone (Android devices Version 6.0 and higher,
iOS devices Version 10 and higher).
• Function Bluetooth
®
(optional) activated.
• The combination instrument is connected to a suitable cell-
phone.
• The GPS function is activated on the connected cellphone.
– Press the RIGHT button when the menu is closed.
– Press the UP or DOWN button until KTM MY RIDE is marked.
Press the RIGHT button to open the menu.
– Press the UP or DOWN button until Navigation is marked.
Press the RIGHT button to confirm the selection.
– Press the UP or DOWN button until Navigation Information is
marked.