COMBINATION INSTRUMENT 7
39
Info
Not every cellphone and headset is suitable for pairing with
the combination instrument.
The standard Bluetooth
®
2.1 must be supported.
7.28.2 Audio (optional)
S03790-01
Condition
• Function KTM MY RIDE (optional) activated.
• Function Bluetooth
®
(optional) activated.
• The combination instrument is connected to a suitable cell-
phone.
• The combination instrument is connected to a suitable Blue-
tooth
®
headset.
• The cellphone music player is open.
– Press the RIGHT button when the menu is closed.
– Press the UP or DOWN button until KTM MY RIDE is marked.
Press the RIGHT button to open the menu.
Warning
Danger of accidents Headphone volume which is too
high distracts attention from traffic activity.
– Always select headphone volume which is low
enough for you to still clearly hear acoustic signals.
– Press the UP or DOWN button until Audio is marked.
Press the RIGHT button to open the menu.
Press the UP button to increase the audio volume.
Press the DOWN button to reduce the audio volume.
Press the RIGHT button change to the next audio track.
Briefly pressing the LEFT button twice changes to the pre-
vious audio title or plays the current audio title from the
start, depending on the cellphone model.
Press the SET button to play or pause the audio track.
Tip
When using a wired headset, the volume cannot be con-
trolled via the combination instrument.
With some cellphones, the audio player needs to be
started before playback is possible.
For easier operation, the Audio function can be
assigned to the C1 or C2 button.
To Next Page
Loading...
Need help?
General
