COMBINATION INSTRUMENT 7
43
– If the device is in the range of the combination instrument and
has not been deleted previously while the Bluetooth
®
function
is active:
The device is automatically paired with the combination
instrument.
If the device is not automatically paired with the combina-
tion instrument after approx. 30 seconds:
– Restart combination instrument or Pairing repeat pro-
cedure.
– To delete a paired device, press the UP or button DOWN until
the paired device is highlighted.
– Open the delete Pairing menu by pressing the RIGHT button
and confirm with the SET button.
7.28.7 Telephony (optional)
S03796-01
Condition
• Function KTM MY RIDE (optional) activated.
• Function Bluetooth
®
(optional) activated.
• The combination instrument is connected to a suitable cell-
phone.
• The combination instrument is connected to a suitable head-
set.
Warning
Danger of accidents Headphone volume which is too
high distracts attention from traffic activity.
– Always select headphone volume which is low
enough for you to still clearly hear acoustic signals.
– Press the RIGHT button to accept an incoming call.
– Press the LEFT button to reject an incoming call.
– Press and hold the UP button in order to increase the volume.
– Press and hold the DOWN button in order to reduce the vol-
ume.
– Press the BACK button briefly to reduce the telephony display.
Info
The call duration and contact are displayed. Depend-
ing on the cellphone settings, the contact is shown by
name.
When the telephony display is activated and reduced in
size, a small window is displayed at the top edge of the
combination instrument display.
An incoming call is visualized in a small window at the
top of the combination instrument display when the
navigation function is active.