KTM 1290 SUPER DUKE R 2021 User Manual

7 COMBINATION INSTRUMENT
50
7.28.23 MTC+MSR (optional)
S03809-01
Condition
• Cruise control system function deactivated.
– Press the RIGHT button when the menu is closed.
– Press the UP or DOWN button until Motorcycle is marked.
Press the RIGHT button to open the menu.
– Press the UP or DOWN button until MTC+MSR is marked.
Press the RIGHT button to open the menu.
– Press the UP or DOWN button until MTC+MSROFF or ON is
marked.
– Press the SET button to confirm the selection.
Info
When riding mode Track or ABS mode Supermoto is
active, the MSR is not active.
After the ignition is switched on, the motorcycle
traction control and engine traction torque control are
enabled again.
7.28.24 ABS
S03810-01
Condition
• The motorcycle is stationary.
– Press the RIGHT button when the menu is closed.
– Press the UP or DOWN button until Motorcycle is marked.
Press the RIGHT button to open the menu.
– Press the UP or DOWN button until ABS is marked.
Press the RIGHT button to open the menu.
– Press the UP or DOWN button to select the desired ABS mode.
–
Press the SET button to confirm the selection.
Info
When the ABS mode Road is active, ABS controls both
wheels.
If the ABS mode Supermoto is active, the ABS only con-
trols the front wheel and the MSR is not active. The rear
wheel is not controlled by ABS and may lock during
braking maneuvers.
7.28.25 Quickshifter + (optional)
S03824-01
– Press the RIGHT button when the menu is closed.
– Press the UP or DOWN button until Motorcycle is marked.
Press the RIGHT button to open the menu.
– Press the UP or DOWN button until Quickshifter + is marked.
Press the RIGHT button to open the menu.
– Press the UP or DOWN button until Quickshifter +OFF or ON is
marked.
– Press the SET button to confirm the selection.

KTM 1290 SUPER DUKE R 2021 Specifications

General

Brand	KTM
Model	1290 SUPER DUKE R 2021
Category	Motorcycle
Language	English