• When releasing the cruise mode, be sure to
return the cruise-control lever fully backward.
(1) Cruise control lever (A) Increase
(B) Decrease
(C) Off
15.1 How to use the cruise control lever (if
equipped) [HST type only]
(1) Cruise control lever (A) Increase
(B) Decrease
(C) Off
Engaging the cruise control device
The proper forward speed will be kept if you apply the
cruise-control lever at any position.
1. To operate faster than the set speed, depress down
the speed-control pedal further in the proper
forward speed.
The set speed will be resumed if you release the
speed-control pedal.
NOTE :
• When you stand up from the operator's seat
with the speed-control pedal depressed or the
cruise-control lever engaged, the engine will
stop regardless of whether the tractor is moving
or not.
This is because the tractor is equipped with
operator presence control system (OPC).
Disengaging the cruise control device
1. Move the cruise-control lever all the way back.
2. Move the cruise-control lever to the “OFF” position
to release the cruise control.
3. Depress both brake pedals.
NOTE :
• Cruise control will be disengaged automatically
when both brake pedals are depressed.
• Cruise-control device does not disengage when
the individual right or left brake is applied.
TRACTOR LIGHTS
(1) Head light
(2) Turn signal / hazard light
(3) Head light (low beam)
(4) Head light (high beam)
(5) Side work light
(1) Rear turn signal / hazard
light
(2) Tail light
INSTRUMENT PANEL AND CONTROLS
FOOT CONTROLS AND HAND CONTROLS
To Next Page
Loading...
Need help?
General
