Kubota L3902 User Manual

2. Fold the ROPS.
CAUTION
To avoid personal injury:
• Hold the ROPS tightly with both hands and
fold the ROPS slowly and carefully.
(1) ROPS
IMPORTANT :
• When raising or folding the ROPS, hold the
part of the ROPS between the label and the
top of the ROPS with both hands.
3. Align the set-bolt holes and insert both set bolts.
Slightly tighten the set bolts and secure them with
the hair-pin cotters.
CAUTION
To avoid personal injury:
• Make sure that both set bolts are properly
installed and secured with the hair-pin
cotters.
(1) Set bolt
(2) Hair pin cotter
2. Raising the ROPS to upright
position (if equipped)
1. Remove both the hair-pin cotters and the set bolts.
(1) Set bolt
(2) Hair pin cotter
2. Raise the ROPS to the “UPRIGHT” position.
CAUTION
To avoid personal injury:
• Raise the ROPS slowly and carefully.
3. Align the set-bolt holes and insert both set bolts.
Slightly tighten the set bolts and secure them with
the hair-pin cotters.
CAUTION
To avoid personal injury:
• Make sure that both set bolts are properly
installed as soon as the ROPS is in the
“UPRIGHT” position and secured with the
hair-pin cotters.
(1) Set bolt
(2) Hair pin cotter
3. Adjusting the foldable ROPS (if
equipped)
1. Adjust free fall of the ROPS upper frame regularly.
OPERATION OF THE FOLDABLE ROPS (IF EQUIPPED) OPERATING THE TRACTOR
L3302,L3902
61

Kubota L3902 Specifications

General

Engine Horsepower	37.5 HP
Cylinders	3
Drive	4WD
3-Point Hitch Category	Category I
Hydraulic System Type	Open Center
Engine Type	Diesel
PTO Horsepower	30.8 HP
Displacement	111.4 cu. in. (1.826 L)
Transmission Type	Gear shift or HST
Number of Gears	8F / 8R (Gear Shift)
Fuel Tank Capacity	11.9 gal (45 L)
Length	121.1 in (3076 mm)
Width	55.1 inches
Height	91.7 in (2329 mm)
Tire Size (Front)	7-16
Tire Size (Rear)	11.2-24