EasyManua.ls Logo

Kubota L3902 User Manual

Kubota L3902
146 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #61 background imageLoading...
Page #61 background image
9. Fully depress the clutch pedal.
(1) Clutch pedal
10. Turn the starter key to the “START” position and
release it when the engine starts.
IMPORTANT :
Because of the safety devices, the engine
will not start except the following
conditions:
PTO gear-shift lever is set in the “OFF”
position.
Synchro-shuttle shift lever is set in the
“NEUTRAL” position.
11. Check to see that all the lamps on the Easy
Checker are “OFF.”
If the lamps on the Easy Checker is still on,
immediately stop the engine and determine the
cause.
12. Release the clutch pedal.
STARTING THE ENGINE [HST
TYPE]
1. Make sure that the parking brake is set.
(See Setting the parking brake on page 39 if the
parking brake is not set)
(1) Brake pedal
(2) Parking brake lever
NOTE :
The parking-brake indicator in the Easy
Checker comes on while the parking brake
is applied.
(1) Parking brake indicator
2. Make sure that the fuel shutoff-valve is in the
“OPEN” position.
(1) Fuel shutoff-valve (A) Close
(B) Open
3. Make sure that the cruise-control lever is in the
“OFF” position.
NOTE :
Depress the both brake pedals together, and
the cruise-control lever automatically
returns to the “OFF” position.
STARTING THE ENGINE [HST TYPE]  OPERATING THE ENGINE
L3302,L3902
55

Table of Contents

Questions and Answers:

Kubota L3902 Specifications

General IconGeneral
Engine Horsepower37.5 HP
Cylinders3
Drive4WD
3-Point Hitch CategoryCategory I
Hydraulic System TypeOpen Center
Engine TypeDiesel
PTO Horsepower30.8 HP
Displacement111.4 cu. in. (1.826 L)
Transmission TypeGear shift or HST
Number of Gears8F / 8R (Gear Shift)
Fuel Tank Capacity11.9 gal (45 L)
Length121.1 in (3076 mm)
Width55.1 inches
Height91.7 in (2329 mm)
Tire Size (Front)7-16
Tire Size (Rear)11.2-24

Related product manuals