Kubota L3902 User Manual

3. After the tractor has stopped, disengage the PTO
clutch.
(See PTO gear shift lever [Manual transmission
type] on page 78)
(1) PTO gear shift lever (A) On
(B) Off
4. Lower the implement to the ground.
(See Position control of 3-point hitch mounted
implement on page 85)
(1) Position control lever
(A) Float
(B) Down
(C) Up
5. Shift the transmission to the “NEUTRAL” position.
(See Main gear shift lever and range gear shift lever
[Manual transmission type only] on page 41)
(1) Main gear shift lever
(2) Range gear shift lever
(A) Neutral position
(B) High
(C) Low
6. Release the clutch pedal.
7. Set the parking brake.
(See Setting the parking brake on page 39)
(1) Brake pedal (2) Parking brake lever
STOPPING THE TRACTOR [HST
TYPE]
1. Slow down the engine.
2. Depress the brake pedal.
(1) Brake pedal
STOPPING THE TRACTOR [HST TYPE] OPERATING THE TRACTOR
L3302,L3902
69

Kubota L3902 Specifications

General

Engine Horsepower	37.5 HP
Cylinders	3
Drive	4WD
3-Point Hitch Category	Category I
Hydraulic System Type	Open Center
Engine Type	Diesel
PTO Horsepower	30.8 HP
Displacement	111.4 cu. in. (1.826 L)
Transmission Type	Gear shift or HST
Number of Gears	8F / 8R (Gear Shift)
Fuel Tank Capacity	11.9 gal (45 L)
Length	121.1 in (3076 mm)
Width	55.1 inches
Height	91.7 in (2329 mm)
Tire Size (Front)	7-16
Tire Size (Rear)	11.2-24