Kubota L3902 User Manual

Tire Tread
11.2-24 R1
Farm
(1) Tread
1115 mm
(43.9 in.)
(1) Tread
1195 mm
(47.1 in.)
(1) Tread
1290 mm
(50.8 in.)
13.6-16 R3
Turf
(1) Tread
1115 mm
(43.9 in.)
15-19.5 R4 In-
dustrial, R14
Hybrid
(1) Tread
1145 mm
(45.1 in.)
(Continued)
Tire Tread
43 x 16.0-20
R14 Hybrid
(1) Tread
1210 mm
(47.6 in.)
2.1 Adjusting the rear wheels
This section describe the procedure to change the
width of the rear tread.
WARNING
To avoid personal injury or death:
• Before jacking up the tractor, park it on a firm
and level ground and chock the rear wheels.
• Fix the front axle to keep it from pivoting.
• Select the jacks that withstand the machine
weight and set them up as shown in the
following figure.
(1) Jack point
1. Remove the bolts that mount the wheel rim and/or
disk.
2. Change the position of the rim and/or disk on right
and left sides to the desired position.
TIRES, WHEELS, AND BALLAST WHEEL ADJUSTMENT
90
L3302,L3902

Kubota L3902 Specifications

General

Engine Horsepower	37.5 HP
Cylinders	3
Drive	4WD
3-Point Hitch Category	Category I
Hydraulic System Type	Open Center
Engine Type	Diesel
PTO Horsepower	30.8 HP
Displacement	111.4 cu. in. (1.826 L)
Transmission Type	Gear shift or HST
Number of Gears	8F / 8R (Gear Shift)
Fuel Tank Capacity	11.9 gal (45 L)
Length	121.1 in (3076 mm)
Width	55.1 inches
Height	91.7 in (2329 mm)
Tire Size (Front)	7-16
Tire Size (Rear)	11.2-24