Kubota L3902 User Manual

(1) Jack points
You can not adjust width of the front tread.
IMPORTANT :
• Do not turn the front discs to obtain wider tread.
• When re-fitting or adjusting a wheel, tighten the
bolts to the following torques.
(1) Bolt
Bolt (1) Tightening torque
137 N⋅m
(14 kgf⋅m)
[100 lbf⋅ft]
Then recheck after driving the tractor as
follows, and thereafter according to SERVICE
INTERVALS on page 93.
Driving tractor
200 m (200 yards) and 10 times of shuttle
movement by 5 m (5 yards)
Tire Tread
7.2-16 R1
Farm
(1) Tread
1095 mm
(43.1 in.)
25 × 8.5-14
R3 Turf
1105 mm
(43.5 in.)
27 × 8.5-15
R4 Industrial,
R14 Hybrid
1115 mm
(43.9 in.)
29 × 9.5-15
R14 Hybrid
1205 mm
(47.4 in.)
2. Rear wheels
You can adjust the width of rear tread with the standard
equipped tires.
(See Adjusting the rear wheels on page 90)
WHEEL ADJUSTMENT TIRES, WHEELS, AND BALLAST
L3302,L3902
89

Kubota L3902 Specifications

General

Engine Horsepower	37.5 HP
Cylinders	3
Drive	4WD
3-Point Hitch Category	Category I
Hydraulic System Type	Open Center
Engine Type	Diesel
PTO Horsepower	30.8 HP
Displacement	111.4 cu. in. (1.826 L)
Transmission Type	Gear shift or HST
Number of Gears	8F / 8R (Gear Shift)
Fuel Tank Capacity	11.9 gal (45 L)
Length	121.1 in (3076 mm)
Width	55.1 inches
Height	91.7 in (2329 mm)
Tire Size (Front)	7-16
Tire Size (Rear)	11.2-24