Kubota L3902 User Manual

AUXILIARY HYDRAULICS
1. How to use the hydraulic block
type outlet when the hydraulically
operated implement is attached
When attaching the hydraulically operated implement,
prepare the hydraulic block-type outlet.
Hydraulic-block-type-outlet is useful when adding
hydraulically operated implement such as front-end-
loader and front blade.
1. Remove the block cover.
(1) Block cover
2. Route the implement inlet, outlet, and return hoses
as shown in the illustration.
(1) Hydraulic block type outlet
(A) From gear pump
(B) To implement
(C) From implement (outlet)
(D) From implement (tank port)
(B) To implement
Maximum flow
25.7 L/min
(6.8 gals./min)
Maximum pressure
16.2 MPa
(165 kgf/cm
2
)
[2347 psi.]
HYDRAULIC UNIT AUXILIARY HYDRAULICS
86
L3302,L3902

Kubota L3902 Specifications

General

Engine Horsepower	37.5 HP
Cylinders	3
Drive	4WD
3-Point Hitch Category	Category I
Hydraulic System Type	Open Center
Engine Type	Diesel
PTO Horsepower	30.8 HP
Displacement	111.4 cu. in. (1.826 L)
Transmission Type	Gear shift or HST
Number of Gears	8F / 8R (Gear Shift)
Fuel Tank Capacity	11.9 gal (45 L)
Length	121.1 in (3076 mm)
Width	55.1 inches
Height	91.7 in (2329 mm)
Tire Size (Front)	7-16
Tire Size (Rear)	11.2-24