KYMCO Super 8 50 Service Manual

10. FINAL REDUCTION
10-3
Super 8 50
Check the left crankcase bearings for
excessive play and inspect the oil seal for
wear or damage.
Inspect the drive shaft and gear for wear or
damage.
Check the transmission case cover bearings
for excessive play and inspect the final shaft
bearing oil seal for wear or damage.
BEARING REPLACEMENT
(TRANSMISSION CASE COVER)
Remove the transmission case cover bearings
using a bearing puller.
Remove the final shaft oil seal.
Bearing Puller
Drive new bearings into the transmission case
cover.
Drive Shaft Bearing
Final Shaft Bearing
Countershaft Bearing
Drive Shaft Bearing
Do not remove the transmission case
cover except for necessary part
replace-ment. When replacing the
drive shaft, also replace the bearing and
oil seal.
＊
Bearing Puller
Oil Seal
Final Shaft Bearing
Countershaft Bearing
Special

KYMCO Super 8 50 Specifications

General

Displacement	49.5 cc
Fuel System	Carburetor
Ignition	CDI
Front Suspension	Telescopic Fork
Front Brake	Disc
Rear Brake	Drum
Front Tire	120/70-12
Rear Tire	130/70-12
Cooling System	Air
Transmission	CVT Automatic
Seat Height	780 mm
Wheelbase	1, 280 mm