KYMCO Super 8 50 Service Manual

5. FUEL INJECTION SYSTEM Super 8 50
5-8
Failure Code
Blink
Failure
Codes
Fault description
Priority
Fault management
5
P1122
Throttle position sensor
movement speed
problem
2
1
.
Make sure if the connector of Throttle position sensor is
connected correctly.
2.Check if the
Throttle position sensor is adjusted.
6
P0560
Battery voltage
malfunction
1
1.
Check if the battery voltage is lower or higher.
2.Check if the charge system is malfunction.
7
P0110
Inlet air temperature
sensor or electric circuit
malfunction
2
1.
Check if the connector of Inlet air temperature
sensor loosen.
2.Check if the resistance of sensor is normal
.
8
P0410
Idle air valve or electric
circuit malfunction
2
1.
Check if the connector of Idle air valve
loosen.
2.Check if the resistance of
valve
is normal.
9
P0505
Idle speed volume
control range
problem
2
1.
Check if the opening angle is over 180
for
Idle air valve.
2.Check if the opening angle is malfunction.
10
P0251
Injector or electric
circuit
problem
2
1.
Check if the connector of Injector is loosen.
2.Check if the ECU send signal to Injector.
3.Check if the power source and resistance of Injector are
malfunction.

KYMCO Super 8 50 Specifications

General

Displacement	49.5 cc
Fuel System	Carburetor
Ignition	CDI
Front Suspension	Telescopic Fork
Front Brake	Disc
Rear Brake	Drum
Front Tire	120/70-12
Rear Tire	130/70-12
Cooling System	Air
Transmission	CVT Automatic
Seat Height	780 mm
Wheelbase	1, 280 mm