KYMCO Super 8 50 Service Manual

5. FUEL INJECTION SYSTEM Super 8 50
5-16
ROLL SENSOR
The engine should be stop when the vehicle
incline over 65° for safety. When you place the
vehicle back to normal position, you have to
key-off and key-on the switch again, then it can
be restarted.
Standard:
Normal: 0.4~1.4V
Fall down > 65°: 3.7~4.4 V
TP SCREW
Don’t adjust the TP screws, they should be
adjusted by KYMCO.
If TP screw lost of the original position, it may
cause to unstable problem.
TP screws
Roll sensor

KYMCO Super 8 50 Specifications

General

Displacement	49.5 cc
Fuel System	Carburetor
Ignition	CDI
Front Suspension	Telescopic Fork
Front Brake	Disc
Rear Brake	Drum
Front Tire	120/70-12
Rear Tire	130/70-12
Cooling System	Air
Transmission	CVT Automatic
Seat Height	780 mm
Wheelbase	1, 280 mm