KYMCO Super 8 50 Service Manual

3. INSPECTION/ADJUSTMENT
3-4
Super 8 50
AIR CLEANER
AIR CLEANER REPLACEMENT
Remove the air cleaner case cover by
removing the 7 screws.
Remove the air cleaner element by removing
the four screws.
Check the element and replace it if it is
excessively dirty or damaged.
CHANGE INTERVAL
More frequent replacement is required when
riding in unusually dusty or rainy areas.
SPARK PLUG
Remove the spark plug.
Check the spark plug for wear and fouling
deposits.
Clean any fouling deposits with a spark plug
cleaner or a wire brush.
Specified Spark Plug:
NGK CR7HSA
Measure the spark plug gap.
Spark Plug Gap: 0.6～0.7mm
Cracks
Damage
Gap, Wear, and
Fouling Deposits
 The air cleaner element has a viscous
type paper element. Do not clean it
with any fluid.
 Be sure to install the air cleaner
element and cover securely.
＊
When installing, first screw in the spark
plug by hand and then tighten it with a
spark plug wrench.
＊
Screws
Air Cleaner Case Cover
Air Cleaner Element
Washer
Deformation
①

KYMCO Super 8 50 Specifications

General

Displacement	49.5 cc
Fuel System	Carburetor
Ignition	CDI
Front Suspension	Telescopic Fork
Front Brake	Disc
Rear Brake	Drum
Front Tire	120/70-12
Rear Tire	130/70-12
Cooling System	Air
Transmission	CVT Automatic
Seat Height	780 mm
Wheelbase	1, 280 mm