Using Document Box
4-28 ADVANCED OPERATION GUIDE
Repeat Copy Box
Setting the Number of Stored Jobs
To maintain free space on the hard disk, you can set the maximum number
of stored jobs.
Use the procedure below.
1
Press the System Menu key.
2
Press [Document Box/Removable Memory], [Next] of Job Box, [Change]
of Repeat Copy Job Retention.
3
Use the [+] and [–]
keys or the numeric
to enter the
maximum number of
stored jobs.
You can enter any
number between 0
and 50.
NOTE: If you enter a value of 0 (zero), no jobs are stored.
4
Press [OK]. The maximum number of stored jobs is set.
5
Press [Return to Top] to return to the initial system menu screen.
Printing a Document
You can print the documents stored in the Repeat Copy box.
Use the procedure below.
1
Press the Document Box key.
2
Press [Job Box].
3
Select [Repeat Copy] box, and press [Open].
Document Box/Removable Memory - Quick Copy Job Retention
Set the maximum number of quick copy/proof print jobs to retain.
Use [-]/[+] or the numeric keys to enter a number.
*Set this number to 0 to not retain any quick copy/proof print jobs.
(0 - 50)
30
Cancel OK
Status 10/10/2007 10:10
job(s)
To Next Page
Loading...
Need help?
General
