Kyocera KM-2560 User Manual

Sending Functions
2-24 ADVANCED OPERATION GUIDE
Background Density Adjustment
Lightens the background of the colored original when it is too dark.
NOTE: You cannot adjust the background density if you selected
[Monochrome] in Color Selection (see page 2-25).
Use the procedure below to set the background density when sending
scanned images.
1
Place the originals on the platen.
2
Press the Send key.
3
Press [Color/Image] and then [Background Density Adj.].
4
Press [On], and
press [1] to [5]
(Lighter- Darker) to
adjust the density.
5
Press [OK].
6
Specify the destination, and press the Start key to start sending.
Status 10/10/2007 10:10
Place original.
Cancel OKAdd Shortcut
Ready to send.
On
Off
Background
Background Density Adj.
Lighter
12345
Darker
1
Press [OK] to display
Destination
the image.

Kyocera KM-2560 Specifications

General

Functions	Print, Copy, Scan, Fax
Print Technology	Laser
Resolution	600 x 600 dpi
Fax Speed	33.6 kbps
Connectivity	USB 2.0, Ethernet
Type	All-in-One Printer
Print Speed	25 ppm
Copy Speed	25 cpm
Zoom Range	25% - 400%
Supported Paper Sizes	A4, A5, B5, Legal, Letter
Warm-Up Time	Less than 30 seconds