Status / Job Cancel
5-18 ADVANCED OPERATION GUIDE
Configuring the Devices
Detailed information on controlling devices is given below.
Removable Memory (USB Memory)
• The usage and capacity of the external media connected to this
machine are displayed.
• Press [Format] to format external media.
• Press [Remove] to safely remove the external media. For details, refer
to Removing the USB Memory in the next section.
FAX Port 1, FAX Port 2
• The information such as sending/receiving and dialing is displayed.
• Press [Line Off] to cancel a fax in sending/receiving. For details, refer
to Canceling FAX Communication on page 5-19 in the section
afterwards.
• Press [Manual RX] to start a fax. Use this function when you want to
talk to the sender before receiving the fax originals. For details, refer to
the Operation Guide of FAX kit.
• Press [Log] to display the fax transmission history. For details, refer to
the Operation Guide of FAX kit.
Format (memory for printer, Compact Flash)
• The information such as cannot recognize or unconnected and the
usage/capacity of memory card are displayed.
• Press [Format] to format the memory card.
• Press [Printing list] to print the partition list. For details, refer to Print of
Partition List.
Removing the USB Memory
There is a way to remove the USB memory safely.
Use the procedure below.
1
Press the Status/Job Cancel key.
Detail
Scanner
Printer
Removable Memory
Hard Disk
FAX Backup Memory
Memory Card
Ready.
Ready.
Safely removable.
Error has occurred.
Not connected.
Format Remove
Display
Error
Format Printing list
Printing Jobs Sending Jobs Storing Jobs
Device/
Communication
Paper /Supplies
Log Executing TX job **. 10/10/2007 10:10
To Next Page
Loading...
Need help?
General
