Kyocera KM-2560 User Manual

Copying Functions
1-48 ADVANCED OPERATION GUIDE
Auto Image Rotation
Automatically rotates the image when the sizes of the original and the
loaded paper matches but the orientations are different. The images will be
rotated 90° counter-clockwise prior to copying.
NOTE: To set Auto Image Rotation as the default mode, refer to Auto
Image Rotation on page 6-31.
The procedure for making copies using Auto Image Rotation is explained
below.
1
Place the originals on the platen.
2
Press the Copy key.
3
Press [Advanced Setup] and then [Auto Image Rotation].
4
Press [On] to select
Auto Image
Rotation.
5
Press [OK].
6
Press the Start key to start copying.
Status 10/10/2007 10:10
Ready to copy.
Copies
Cancel OK
Auto Image Rotation
Press [OK] to display
Add Shortcut
Off
When original and paper source size are the
same, but their orientation is different,
rotate image 90 degrees when copying .
On
1
the image.

Kyocera KM-2560 Specifications

General

Functions	Print, Copy, Scan, Fax
Print Technology	Laser
Resolution	600 x 600 dpi
Fax Speed	33.6 kbps
Connectivity	USB 2.0, Ethernet
Type	All-in-One Printer
Print Speed	25 ppm
Copy Speed	25 cpm
Zoom Range	25% - 400%
Supported Paper Sizes	A4, A5, B5, Legal, Letter
Warm-Up Time	Less than 30 seconds