Kyocera KM-2560 User Manual

Sending Functions
ADVANCED OPERATION GUIDE 2-23
2
Sharpness
Select the sharpness of the image outline.
The table below shows the available settings.
NOTE: You cannot specify the sharpness if you selected [Monochrome]
in Color Selection (see page 2-25).
Use the procedure below to set the sharpness when sending scanned
images.
1
Place the originals on the platen.
2
Press the Send key.
3
Press [Color/Image] and then [Sharpness].
4
Press [-3] to [+3]
(Unsharpen-
Sharpen) to adjust
the sharpness.
5
Press [OK].
6
Specify the destination, and press the Start key to start sending.
Item Detail
Sharpen Emphasize the image outline. Make letters and
lines appear sharper.
Unsharpen Blur the image outline. Can weaken a Moire
effect (grids appearing as wavelike patterns
when scanning printed photos).
Status 10/10/2007 10:10
Ready to send.
Destination
Add Shortcut Cancel OK
Sharpen
Sharpness
Place original.
Unsharpen
0 +1 +2 +3-1-2-3
1
Press [OK] to display
the image.

Kyocera KM-2560 Specifications

General

Functions	Print, Copy, Scan, Fax
Print Technology	Laser
Resolution	600 x 600 dpi
Fax Speed	33.6 kbps
Connectivity	USB 2.0, Ethernet
Type	All-in-One Printer
Print Speed	25 ppm
Copy Speed	25 cpm
Zoom Range	25% - 400%
Supported Paper Sizes	A4, A5, B5, Legal, Letter
Warm-Up Time	Less than 30 seconds