Copying Functions
1-36 ADVANCED OPERATION GUIDE
Cover Mode
Add a cover to the finished copies. You can copy the first page and/or the
last page onto colored paper or thick paper fed from the different paper
source than the regular one. The following two options are available. Paper
for the cover is supplied from the Multi Purpose tray.
To feed the cover paper from the cassette, refer to Paper Source for Cover
Paper on page 6-15.
The procedure for using Cover mode copying is explained below.
1
Place the originals on the platen.
2
Press the Copy key.
3
Press [Layout/Edit] and then [Cover].
4
Press [Front Cover]
or [Front and Back
Covers].
5
Press [OK].
6
Press the Start key.
If the originals are placed on the platen, consecutively replace each
original after pressing the Start key.
After scanning all originals, press [Scan finish] to start copying.
Type of Cover Description
Front Cover First page of the originals is copied on a different
paper.
Front and Back
Covers
First page and last page of the originals are
copied on different paper.
Status 10/10/2007 10:10
Ready to copy.
Copies
Cancel OK
Cover
Press [OK] to display
Add Shortcut
Add a cover page of a different color or
thickness, using a different paper source.
Please choose either [Front Cover] or
[Front and Back Covers].
*Set paper source for cover in System Menu.
Front and Back
Covers
None Front Cover
1
the image.
To Next Page
Loading...
Need help?
General
