Kyocera KM-2560 User Manual

Sending Functions
ADVANCED OPERATION GUIDE 2-19
2
File Separation
Create several files by dividing scanned original data page by page, and
send the files.
Use the procedure below to split scanned original data into separate files
when sending scanned originals.
1
Place the originals on the platen.
2
Press the Send key.
3
Press [Type of Original/Transmission] and then [File Separation].
4
Press [Each Page]
to set File
Separation.
5
Press [OK].
6
Specify the destination, and press the Start key. The scanned original is
sent after being divided into files of one page each. Three-digit serial
number such as abc_001.pdf, abc_002.pdf... is attached to the end of the
file name.
Status 10/10/2007 10:10
Ready to send.
Destination
Add Shortcut
Create and send a file for each page
of the original that was read.
Cancel OK
Each Page
File Separation
Place original.
Off
1
Press [OK] to display
the image.

Kyocera KM-2560 Specifications

General

Functions	Print, Copy, Scan, Fax
Print Technology	Laser
Resolution	600 x 600 dpi
Fax Speed	33.6 kbps
Connectivity	USB 2.0, Ethernet
Type	All-in-One Printer
Print Speed	25 ppm
Copy Speed	25 cpm
Zoom Range	25% - 400%
Supported Paper Sizes	A4, A5, B5, Legal, Letter
Warm-Up Time	Less than 30 seconds