3. Installation
Mounting Options
the bottom side; see the bottom view in the Mechanical Drawings section. To order mounting accessories,
please contact. Fasten the device with the screws enclosed to the accessory.
WARNING! Always use the supplied screws. Using different (e.g. longer) ones may cause damage to the
device.
1U High Rack Shelf
Allows rack mounting for half-rack, quarter-rack and pocket sized units.
1U high rack shelf provides mounting holes for fastening two half-rack or four quarter-rack sized units.
Pocket-sized devices can also be fastened to the shelf
Mounting with UD Kit-double
The below example demonstrates the application of UD Kit double accessory:
WARNING! Using different (e.g. longer) screws may cause damage to the device.
INFO: The device is half-rack sized.
To Next Page
Loading...
Need help?
General
