MMX2 series – User's Manual 21
Automatic Input Selection - Example
The Concept
If there is no other source connecting to the switcher, only Laptop 2
switched to the HDMI output. If the Laptop 2 and the PC are also connected to the switcher, the PC (HDMI
input 3) will be switched to the HDMI output. If the Media player is connected to HDMI input 2, the Media player
will be switched to the HDMI output. Finally, if the Laptop 1 is connected (HDMI input 1), it will be switched to
HDMI output as it has the highest priority – independently of the presence of the other video signals.
Settings
▪ HDMI output: Set the Autoselect to Enabled. The Autoselect mode is Priority detect. The priorities are the
following (the lowest number means the highest priority):
Source device Input port Priority
I1 (HDMI IN 1) 0
Media player I2 (HDMI IN 2) 1
PC I3 (HDMI IN 3) 2
3
Autoselect
section.
Audio Interface
The device can receive embedded audio signal on the HDMI inputs. The switcher has a built-in audio de-
embedder which means the device is able to de-embed audio from its video ports to its analog audio output
port.
Ethernet Interface
Summary of Ethernet ports
Secure
Control
Ethernet
Utility
Ethernet
Ethernet
8 1 8 1
- -
▪
the section.
▪
protocol in the section.
▪
Update.
▪
▪ The
device with section.
▪ REST API interface is also desiged for controlling the switcher. See more details in the
REST API Reference section.
To Next Page
Loading...
Need help?
General
