MMX2 series – User's Manual 66
Enabling Authentication
INFO: Set the password before enabling the authentication, because no password is set by default. Restart
of the HTTP(S) services is required to apply the authentication settings.
Request and Response
ɯ <ip><port>
ɯ body: <status>
ɮ header: 200 OK
ɮ body: <status>
Parameters
Parameter description Parameter values
<port> Port type
HTTP
HTTPS
<status>
Authentication enabled
Authentication disabled
true
false
Example
ɯ
ɯ body: false
ɮ header: 200 OK
ɮ body: false
INFO: Port numbering can be found in the Port Numbering section.
BAUD Rate Setting
Request and Response #rs-232 #rs232
ɯ <ip><serial_port>
ɯ body: <baudrate>
ɮ header: 200 OK
ɮ body: <baudrate>
Parameters
Parameter description Parameter values
<serial_port> Serial port number
P1-P2
<baudrate> Baud rate value
9600, 19200, 38400, 57600, 115200
Example
ɯ
ɯ body: 19200
ɮ header: 200 OK
ɮ body: 19200
Stop Bits Setting
Request and Response #rs232 #rs-232 #serial
ɯ <ip><serial_port>
ɯ body: <stopbits>
ɮ header: 200 OK
ɮ body: <stopbits>
Parameters
Parameter description Parameter values
<serial_port> Serial port number
P1-P2
<stopbits> Stop bit value
1
2
Example
ɯ
ɯ body: 1
ɮ header: 200 OK
ɮ body: 1
To Next Page
Loading...
Need help?
General
