MMX2 series – User's Manual 97
System Commands
ç <custom_name>
Resetting the Device
ç
Restoring the Factory Default Settings
ç
ç
ç <lock_status>
Setting the Current Time
ç <current_time>)
Identifying the Device
ç
Toggling the Dark Mode Setting
ç <mode_state>
Setting the Delay of the Dark Mode Setting
ç <delay_time>
Video Port Settings - General
ç <in>:<out>)
Switching an Input to All Outputs
ç <input>)
ç SET·<port><locked_state>
ç SET·<port>.Mute=<muted_state>
Setting the Autoselect Policy
ç SET·/V1/MEDIA/VIDEO/AUTOSELECT/<out>.Policy=<autoselect_mode>
Changing the Autoselect Included Input Ports
ç SET·/V1/MEDIA/VIDEO/AUTOSELECT/<out>/<in>.Included=<state>
Changing the Input Port Priority
ç SET·/V1/MEDIA/VIDEO/AUTOSELECT/<out>/<in>.Priority=<prio_num>
ç GET·<out>.ConnectedSource
ç GET·<out><in>
ç GET·<n>.ConnectedDestinations
ç GET·<port>.SignalPresent
HDCP Setting (Input Port)
ç <in><allowed_hdcp>
HdcpMode
ç <out>.HdcpMode=<hdcp_mode>
OutputSignalType
ç <out>.OutputSignalType=<signal_type>
EmbeddedAudioPresent
ç <port>.EmbeddedAudioPresent
EmbeddedAudioMute
ç <port>.EmbeddedAudioMute=<mute_state>
ç <out>
HDCP Capability (Output Port)
ç <out><hdcp_ver>
HDCP Setting (Output Port)
ç <out><allowed_hdcp>