MMX2 series – User's Manual 32
Port Properties Window
Clicking on the port tile opens the Port properties window. This section shows the available settings and
status information by port types. #lock #unlock #mute #unmute
HDMI Video Input
Clicking on the HDMI video input port icon results in opening the Port properties window. The most important
information and settings are available from the panel.
Port properties window of the HDMI video input
Available settings and tools
Port name
The name of a port can be changed by typing the new name and clicking on the Set button. The following
dot (.). Max length: 63 characters.
Lock #lock #unlock
The port can be locked to the currently connected output ports by adding a tick. If the port is locked, the
crosspoint state of this port cannot be changed.
INFO:
inputs are locked in that line.
Mute #mute #unmute
transmitted from the input port.
Allow HDCP Version #hdcp
ATTENTION! HDCP 2.2 signal handling is limited up to two input ports at the same time.
▪ Off: The connected source will detect that the switcher is not HDCP-compliant and turn off
authentication if the content allows it.
▪ HDCP 1.4:
compliant with HDCP 2.2.
▪ HDCP 2.2: The connected source will detect that the switcher is compliant with HDCP 2.2.
Frame detector
For more details, see the Frame Detector section.
To Next Page
Loading...
Need help?
General
