MMX2 series – User's Manual 93
Setting a Password for Authentication
INFO: Due to security reasons, the password is not stored in any property, so it can not be queried. No
password is set by default, setting a password before authorizing the authentication is necessary.
Command and Response #password
ç <password>)
æ mO·
Parameters
Parameter description
<password> max. character length: 100
Example
ç
æ
Enabling Authentication
INFO: Set the password before enable the authentication, because no password is set by default.
Command and Response
ç SET·/V1/MANAGEMENT/NETWORK/SERVICES/<port>.AuthenticationEnabled=<status>
æ pw·/V1/MANAGEMENT/NETWORK/SERVICES/<port>.AuthenticationEnabled=<status>
ç
æ
Parameters
Parameter description Parameter values
<port> Port type
HTTP, HTTPS
<status>
Authentication enabled
Authentication disabled
true, false
Example
ç
æ
ç
æ
INFO: Restart HTTP(S) Services is required after the authentication settings changed.
Restarting Network Services
Command and Response #http #https
ç ·<port>:restart()
æ <port>:restart=
Parameters
Parameter description Parameter values
<port> Port type
HTTP
HTTPS
Example
ç
æ
To Next Page
Loading...
Need help?
General
