MMX2 series – User's Manual 86
Command and Response
ç GET·<audio_in>.ConnectedDestinations
æ pr·<audio_in>.ConnectedDestinations=
Parameters
Parameter Parameter description
<audio_in> Audio input port
I1-I4
Audio input port number
Example
ç
æ
Setting Autoselect Operation Mode
Command and Response
ç SET·<op_mode>
æ pw·<op_mode>
Parameters
Parameter Parameter description
<op_mode> Operation mode
Follow video
Follows the video crosspoint state
automatically.
Off
Autoselect function is disabled.
Example
ç
æ
Setting the Followed Video Port to Autoselect
Command and Response
ç SET·/V1/MEDIA/AUDIO/AUTOSELECT/O4.VideoFollowPort=<out>
æ pw·/V1/MEDIA/AUDIO/AUTOSELECT/O4.VideoFollowPort=<out>
Example
ç
æ
Locking the Audio Port
Command and Response
ç SET·<audio_port><locked_state>
æ pw·/V1/MEDIA/AUDIO/XP/<audio_port>.Lock=<locked_state>
Parameters
Parameter Parameter description
<audio_port> Audio Port
I1-I4
O4
Audio input port number
Audio output port number
<locked_state>
true
false
The port is locked
The port is unlocked
Example
ç
æ
Muting the Audio Port 1.
INFO: Suspends the connection of the chosen port (no signal is forwarded).
Command and Response
ç SET·<audio_port>.Mute=<muted_state>
æ pw·/V1/MEDIA/AUDIO/XP/<audio_port>.Mute=<muted_state>
Parameters
Parameter Parameter description
<audio_port> Audio Port
I1-I4
O4
Audio input port number
Audio output port number
<muted_state> Muted state
true
false
The port is muted.
The port is unmuted.
Example
ç
æ
INFO:
▪
▪
▪
To Next Page
Loading...
Need help?
General
