MMX2 series – User's Manual 91
Changing the Subnet Mask (Static)
Command and Response #ipaddress
ç <netmask>
æ pw·/V1<netmask>
Example
ç
æ
ç
æ
INFO: The applySettings method will save and apply the new value, and will reboot the device.
INFO: The current setting can be queried by using the GET command.
Changing the Gateway Address (Static)
Command and Response
ç <gw_address>
æ pw·/V1<gw_address>
Example
ç
æ
ç
æ
INFO: The applySettings method will save and apply the new value, and will reboot the device.
INFO: The current setting can be queried by using the GET command.
Applying Network Settings
Command and Response
ç
æ
Example
ç
æ
All network settings that were changed are applied and network interface restarts.
Setting the Hostname
The host name is a property that can be used instead of the IP address when connecting to the device. It is
Add
New Favorite Device section. If the IP address of the device is changing, the host name can be used as a
modifying the hostname.
Command and Response
ç <unique_name>
æ <unique_name>
Parameters
The <unique_name>
of the English alphabet and numbers. Hyphen (-) and dot (.) are also accepted, except as last character.
Example
ç
æ
To Next Page
Need help?
General
