Lightware UMX-TPS-TX100 Series User Manual

 UMX-TPS-TX100 series – User's Manual 143

Setting an Action by Specifying a Direct Path
ç <loc>.Action=<expression>

ç <loc>.Action=<event_nr>

ç <loc>.Action=<macro_name>
Event Manager Tool Kit
Setting the Delay
ç <loc>.ConditionTimeout=<time>
ç <loc>.ConditionEndCheck=
ç <loc>.ConditionTimeoutContinuous=
Setting the Name of the Event
ç <loc>.Name=<string>
Enable the Event
ç <loc>.Enabled=
Triggering a Condition
ç <loc>:triggerCondition(1)

ç <loc>.ConditionCount

ç <loc>.ExternalConditionTriggerCount
Testing an Action
ç <loc>:ActionTest(1)
Variable-Management

ç <loc><value>
Addition and Subtraction (Add Method)
ç <loc>:add(<operand>;<min>;<max>)
Addition and Subtraction (Cycle Method)
ç <loc>:cycle(<operand>;<min>;<max>)

ç <loc>:case(<min> <max> <val>;)
Scan and Store
ç <loc>:scanf(<path>.<property>;<pattern>)

ç <loc>:printf(<prefix>%s<postfix>)

Set the DHCP State
ç <dhcp_status>
Change the IP Address (Static)
ç <IP_address>
Change the Subnet Mask (Static)
ç <netmask>
Change the Gateway Address (Static)
ç <gw_address>
Apply Network Settings
ç 
Ethernet Tool Kit
Device Filter Based on MAC Address
ç <loc>=<MAC_address>;<receive>;<send>;<na
me>

ç <port_mode>
HTTP Port Blocking
ç <port_mode>
HTTP Post Receiving Blocking
ç <port_mode>

ç MAC_address)
Setting the Host Name
ç <unique_name>
Ethernet Message Sending
Sending a TCP Message (ASCII-format)
ç <IP_address>:<port_no>=<message>)





Lightware UMX-TPS-TX100 Series Specifications

General

Brand	Lightware
Model	UMX-TPS-TX100 Series
Category	Transmitter
Language	English