Lightware UMX-TPS-TX100 Series User Manual

 UMX-TPS-TX100 series – User's Manual 145

RS-232 Message Sending
Sending a Message (ASCII-format) via RS-232
ç <message>)
Sending a Text (ASCII-format) via RS-232
ç <message>)
Sending a Binary Message (HEX-format) via RS-232
ç <message>)
Using Hexadecimal Codes
RS-232 Message Recognizer
Enable the Recognizer
ç <serial_port>.RecognizerEnable=<recognizer_enable>
Set the Delimiter Hex
ç <delimiter>
Set the Timeout
ç <timeout>

ç 

ç 

ç 

ç 

ç 
Set the Active Timeout
ç <a_timeout>
Running an Immediate Event Action
ç <loc>.ActionTrigger=<event_nr>
Sending CEC Commands

ç <port>:sendClick(<command>)
Further Commands
ç <port>:send(<command>)
Sending an OSD String
ç <port>.OsdString=<text>
ç <port>:send(set_osd)
Sending CEC Commands in Hex Format
ç <port>:sendHex(<hex_code>)

ç <port>

Enable Command Injection Mode
ç <port>

ç <port>
Infrared Message Sending

ç <output_port>:sendProntoHex(<hex_code>)
Sending Pronto Hex Codes in Big-endian Format via IR Port
ç <output_port>:sendProntoHexBigEndian(<hex_code>)

Set the Direction of a GPIO Pin
ç <port>.Direction=<direction>

ç <port>.Output=<value>

ç <port>:toggle()
EDID Management

ç 

ç <dynamic>





Lightware UMX-TPS-TX100 Series Specifications

General

Brand	Lightware
Model	UMX-TPS-TX100 Series
Category	Transmitter
Language	English